Fire Alarm System Emergency Push Button Break Glass Manual Pull Station

• Customization: Available
• Type: Smoke Alarm
• Usage: Call Point
• Model NO.: SB106
• Installation Mode: Wall Mounted
• Certification: CE
• Application: Home, Communication Electronic Products
• Operating Voltage Range: 9 to 28VDC
• Operating Degree Range: -10ºC to 50 ºC
• Alarm Resistance: 470Ω
• Color: Yellow
• Marerial: ABS & PC
• Transport Package: Carton
• Specification: 188*88*50mm
• Trademark: fire
• Origin: China
• HS Code: 8531100000
• Production Capacity: 500000/Month

Product Description

The conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by pressing its breakable glass. The manual call point can be test by a test key without breaking the glass.eatures and Benefits Compatible with all the conventional fire alarm control panel Can be reset by key 470 Ohm resistance Easy surface mounting Base included

 

Operating Voltage Range: 24 VDC Volts 
Alarm Current 10 to 30 mA @ 24 VDC 
Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing 
Operating Temperature Range: -10°C to 50°C (14°F to 122°F)
Input terminal Wire Gauge: 12 to 18 AWG 
Dimensions: Length 88mm, Width 88mm, Depth 50mm
Weight: Net Weight 172g, Gross Weight 185g

Loop Design and Wiring 
The fire alarm control panel Zone wire can be connected 
to terminal 2(+),4(-). 
And there is a 5.1V Zener diode should be connected to 
terminal 1A and 4A.(included by default). 
If the manual call point is in the end of the zone wire, a 
5.6K resistance should be connected to terminal 2, 4. 
INSTALLATION 
NOTE: All wiring must conform to applicable local 
codes, ordinances, and regulations. 
Mounting Indoor Wall 
1. Attach mounting base to wall at 1.5 meter's high. 
2. Connect field wiring to terminals 
3. To attach product to mounting base. 
4. Secure product by tightening the one mounting screws 
in the front of the product housing. 
Figure 1. Install and Wiring diagram: