Fire Alarm Best Quality Plastic Fire Alarm Break Glass Manual Call Point

• Customization: Available
• Type: Smoke Alarm
• Usage: Call Point
• Model NO.: SB106
• Installation Mode: Wall Mounted
• Certification: CE
• Application: Home, Communication Electronic Products
• Operating Voltage Range: 9 to 28VDC
• Operating Degree Range: -10ºC to 50 ºC
• Alarm Resistance: 470Ω
• Color: Yellow
• Marerial: ABS & PC
• Transport Package: Carton
• Specification: 140*105*45
• Trademark: fire
• Origin: China
• HS Code: 8531100000
• Production Capacity: 500000/Month

Product Description

 

1.Suitable for N.O.or N.C. fire or access systems

2.Meet the requirement of BS5839 Part

3.The casing moulded from engineered plastic

4.With high impact strength,high resistance to heat

5.With good electrical properities

6.All metal is of brass and phosphor bronze ensuring

7.Life long resistance against corrosio

GENERAL DESCRIPTION
The SB106 conventional manual call point designed for 
conventional fire alarm system for reporting fire or 
emergency condition by pressing its breakable glass. The 
manual call point can be test by a test key without 
breaking the glass. 
Loop Design and Wiring 
The fire alarm control panel Zone wire can be connected 
to terminal 2(+),4(-). 
And there is a 5.1V Zener diode should be connected to 
terminal 1A and 4A.(included by default). 
If the manual call point is in the end of the zone wire, a 
5.6K resistance should be connected to terminal 2, 4. 
INSTALLATION 
NOTE: All wiring must conform to applicable local 
codes, ordinances, and regulations. 
Mounting Indoor Wall 
1. Attach mounting base to wall at 1.5 meter's high. 
2. Connect field wiring to terminals 
3. To attach product to mounting base. 
4. Secure product by tightening the one mounting screws 
in the front of the product housing. 
Figure 1. Install and Wiring diagram: