• Emergency Button Break Glass Fire Alarm Manual Call Point
  • Emergency Button Break Glass Fire Alarm Manual Call Point
  • Emergency Button Break Glass Fire Alarm Manual Call Point
  • Emergency Button Break Glass Fire Alarm Manual Call Point
  • Emergency Button Break Glass Fire Alarm Manual Call Point
  • Emergency Button Break Glass Fire Alarm Manual Call Point

Emergency Button Break Glass Fire Alarm Manual Call Point

Type: Smoke Alarm
Usage: Call Point
Installation Mode: Wall Mounted
Certification: CE
Application: Home, Communication Electronic Products
Operating Voltage Range: 9 to 28VDC
Samples:
US$ 3/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Diamond Member Since 2018

Suppliers with verified business licenses

Rating: 5.0/5
Trading Company

Basic Info.

Model NO.
SB106
Operating Degree Range
-10ºC to 50 ºC
Alarm Resistance
470Ω
Color
Yellow
Marerial
ABS & PC
Transport Package
Carton
Specification
188*88*50mm
Trademark
fire
Origin
China
HS Code
8531100000
Production Capacity
500000/Month

Product Description

The conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by pressing its breakable glass. The manual call point can be test by a test key without breaking the glass.eatures and Benefits Compatible with all the conventional fire alarm control panel Can be reset by key 470 Ohm resistance Easy surface mounting Base included
Emergency Button Break Glass Fire Alarm Manual Call Point
 
Operating Voltage Range: 24 VDC Volts 
Alarm Current 10 to 30 mA @ 24 VDC 
Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing 
Operating Temperature Range: -10°C to 50°C (14°F to 122°F)
Input terminal Wire Gauge: 12 to 18 AWG 
Dimensions: Length 88mm, Width 88mm, Depth 50mm
Weight: Net Weight 172g, Gross Weight 185g

Loop Design and Wiring 
The fire alarm control panel Zone wire can be connected 
to terminal 2(+),4(-). 
And there is a 5.1V Zener diode should be connected to 
terminal 1A and 4A.(included by default). 
If the manual call point is in the end of the zone wire, a 
5.6K resistance should be connected to terminal 2, 4. 
INSTALLATION 
NOTE: All wiring must conform to applicable local 
codes, ordinances, and regulations. 
Mounting Indoor Wall 
1. Attach mounting base to wall at 1.5 meter's high. 
2. Connect field wiring to terminals 
3. To attach product to mounting base. 
4. Secure product by tightening the one mounting screws 
in the front of the product housing. 
Figure 1. Install and Wiring diagram:

Emergency Button Break Glass Fire Alarm Manual Call Point





 

Send your message to this supplier

*From:
*To:
avatar Miss Eleanor Lu
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now