Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb

Shenzhen Puzhesi Technology Co., Ltd.
  • Audited Supplier
  • 9 yrs

Contact Supplier

Still deciding? Get samples of $ !
Request Sample

Product Highlights

  • Early Fire Detection: Sends sound and light alarms in early fire stages for extra evacuation time.
  • Photoelectric Sensor: Uses photoelectric sensor technology for reliable smoke detection.
  • CE Certified: Complies with EN-14604:2005/AC:2008 standard for safety.
  • Low Power Consumption: Standby current <=10uA and alarm current <=3mA for efficiency.
  • High Volume Alarm: Sound pressure >=85dB at 3m distance for clear warning.
  • Fault Detection: Auto-detects sensor short circuit, disconnection, or low battery.
  • Easy Installation: Ceiling mounting with standard 75-80mm hole spacing.

Product Images of Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb

Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb pictures & photos
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb pictures & photos
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb pictures & photos
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb pictures & photos
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb pictures & photos
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb pictures & photos
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
  • Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
  • Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
    Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
  • Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
    Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
  • Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
    Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
  • Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
    Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
  • Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
    Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
  • Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
    Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb

Find Similar Products

Product Description

1. Product Description

The product is smoke detector, it can send out sound and light alarm signal in the early stage of the fire if properly installed and maintained, in that case you will have extra time to control the fire or to evacuate at once. This product is designed for household or similar residential application use.

2. Techinical Data
Model No. LZ-1902
Standard  EN-14604:2005/AC:2008
Voltage DC9V
Standby Current <=10uA
Alarm Current <=3mA
Sensor Type photoelectric
Temperature -10ºC~+40ºC
Ambient Humidity <=95%R.H
Alarm Indication Red LED & Buzzer
Sound Pressure >=85dB(around 3m)
N.W. 89g(not incl. batttery)
Product Size Φ100*36.7mm
Installation Way Ceiling Mounting

3. Installation method

  1. Choose the right installation placement.
  2. Drill 2 round holes with 5mm diameter on the ceiling. ( Distance between the two holes is 75-80 mm)
  3. Use the enclosed two expansion rubber and plugs into the holes.
  4. Install the mounting bracket of the smoke detector on the ceiling. by using the two screws enclosed.
  5. Install the smoke detector battery to the mounting bracket. Note: Step 3 and 4 can be ignored if it is mounted on a wooden ceiling.

4. Test Function

  1. Put the 9 V battery into the detector, LED will flash once every 30 seconds and the alarm won't make any sound, which indicating the detector will work in normal standby condition.
  2. Press the test button and keep for a while, then the smoke detector will flash and 5 seconds later the alarm will emit a sound, when the sounder emits three consecutive sounds, release the test button, the detector will stop alarm within seconds.
5. Maintenance
  1. It is recommended to press the test button every week to check the smoke detector works correctly.
  2. To ensure the sensitivity of the product, clean the surface of the detector with soft brush every month.
  3. The smoke detector is with fault detection function. When the smoke sensor is short circuited or  disconnected, the detector will automatically detect and send a fault signal. For example alarm will emit a beep between two flashes. When the  battery voltage is  too low, the detector will periodically send out low voltage fault signals. For example LED flashes every 30s and alarm emits a beep, in this case battery should be replaced accordingly.
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb
Ceiling Mounted Home Alarm Stand Alone Smoke Detector with Lpcb


 

About the Supplier

This supplier has been audited by TÜV Rheinland. Verify the report on the official TÜV Rheinland website with ID "MIC-ASR2221392". Items marked "verified" are certified.

Watch Video
Watch Video
Shenzhen Puzhesi Technology Co., Ltd.
Shenzhen Puzhesi Technology Co., Ltd.
Shenzhen Puzhesi Technology Co., Ltd.
Shenzhen Puzhesi Technology Co., Ltd.
Shenzhen Puzhesi Technology Co., Ltd.
Shenzhen Puzhesi Technology Co., Ltd.
Shenzhen Puzhesi Technology Co., Ltd.
Shenzhen Puzhesi Technology Co., Ltd.

About Our Factory & Business Background

verified Business Type
Trading Company
Address
3005-3005a, Bao De Industrial Center, Lixin Nan Road, Fuyong Town, Baoan District, Shenzhen, Guangdong, China
verified Plant Area
248 square meters
verified Number of Employees
7
verified Registered Capital
6,000,000 RMB
verified Terms of Payment
LC, T/T, D/P, PayPal, Western Union, Small-amount payment
verified International Commercial Terms(Incoterms)
FOB, CIF
verified Average Lead Time
Peak Season Lead Time: one month
Off Season Lead Time: within 15 workdays
verified Nearest Port
Shenzhen Port

Our Production Capability & Technical Expertise

verified Main Products
Fire Alarm Control Panel, Smoke Detector, Heat Detector, Conventional Beam Detector, Extinguishant Control Panel
verified R&D Engineers
1 people

Our Industry Experience & Global Business Record

verified Year of Establishment
2012-07-20
Export Year
2015-07-02
verified Main Markets
Europe, Southeast Asia/ Mideast, Domestic
verified Number of Foreign Trading Staff
4
verified Overseas Agent/Branch
No

FAQ

What is the working voltage?
The smoke detector operates on DC 9V.
How should the detector be installed?
It is designed for ceiling mounting. Drill two 5mm holes with 75-80mm spacing, install the bracket, and attach the detector.
What does the LED flashing indicate?
Flashing once every 30 seconds indicates normal standby. Flashing with a beep indicates low battery or a fault signal.
How do I test the smoke detector?
Press and hold the test button. The detector will flash and emit a sound after 5 seconds. Release the button when you hear three consecutive sounds.
What maintenance is required?
Test the button weekly and clean the surface with a soft brush monthly to ensure sensitivity.
What standards does this product comply with?
The product meets the EN-14604:2005/AC:2008 standard.

Send your message to this supplier

Contact Information
Recipient
Message

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now