YT102 Conventional Photoelectric Smoke Detector EN54-7
General
YT102 Conventional Smoke Detector, Operates by Advanced MCU Expert Algorithm Software.
Key Specifications/Special Features
They work perfectly with all conventional intelligent fire control panels
Dual LEDs for 360-degree visibility
Advanced MCU Expert Algorithm Software.
Easy installation and maintenance
Durable sensor head, no need for replacement
SMD circuit board design-satisfactory quality and reliability guaranteed
SPECIFICATIONS
| N.O: |
YT102 |
| Operating Voltage Range: |
9 to 28VDC Volts Non-polarized |
| Standby Current: |
≤60µA @ 24 VDC |
| Maximum Alarm Current (LED on: ) |
≤30mA @ 24 VDC |
| Operating Humidity Range: |
10% to 93% Relative Humidity, Non-condensin |
| Operating Temperature Range: |
14°F to 122°F (-10°C to50°C) |
| Adjustable Sensitivity: |
1.06±.26%FT. |
Remove power from initiating-device circuits before installing detectors.
1. Wire the sensor base per the wiring diagram, Figure 1.
2. Install the sensor into the sensor base. Push the sensor into the base while turning it clockwise to secure it in place.
3. After all sensors have been installed, apply power to the control unit.
4. Test the sensor(s) as described in the TESTING section of this manual.
5. Notify the proper authorities that the system is in operation.
Audited Supplier 
){kind=link}
){kind=link}