Yt102 Conventional Smoke Detetor

• Customization: Available
• Type: Smoke Alarm
• Signal Transmission: Wired Alarm
• Model NO.: YT102
• Certification: CE, RoHS
• Application: Indoor
• Working Principle: Electro-Optical Type
• Transmission Mode: Cable
• Alarm Volume (within 1m): ≥90dB
• Receive Frequency: 485
• Weight: 155g
• Adjustable Sensitivity: 1.06±.26%FT
• Standard: En54-7
• Power: 24V
• Color: White
• Transport Package: Carton
• Specification: 103x55 mm
• Trademark: CONVOY
• Origin: China
• Production Capacity: 50000

Product Description

YT102 Conventional Photoelectric Smoke Detector  EN54-7

General
YT102 Conventional Smoke Detector, Operates by Advanced MCU Expert Algorithm Software.
Key Specifications/Special Features
They work perfectly with all conventional intelligent fire control panels
Dual LEDs for 360-degree visibility
Advanced MCU Expert Algorithm Software.
Easy installation and maintenance
Durable sensor head, no need for replacement
SMD circuit board design-satisfactory quality and reliability guaranteed




SPECIFICATIONS

N.O:	YT102
Operating Voltage Range:	9 to 28VDC Volts Non-polarized
Standby Current:	≤60µA @ 24 VDC
Maximum Alarm Current (LED on: )	≤30mA @ 24 VDC
Operating Humidity Range:	10% to 93% Relative Humidity, Non-condensin
Operating Temperature Range:	14°F to 122°F (-10°C to50°C)
Adjustable Sensitivity:	1.06±.26%FT.

Remove power from initiating-device circuits before installing detectors.

1. Wire the sensor base per the wiring diagram, Figure 1.
2. Install the sensor into the sensor base. Push the sensor into the base while turning it clockwise to secure it in place.
3. After all sensors have been installed, apply power to the control unit.
4. Test the sensor(s) as described in the TESTING section of this manual.
5. Notify the proper authorities that the system is in operation.