Intelligent Addressable Optical Smoke Detector with Ancillary Remote Indicator Output

• Customization: Available
• Type: Fire Alarm Host
• Function: Linkage
• Model NO.: TX7100
• Usage: Auto, Fire, Smoke
• Certification: CE, Lpcb
• Networking Mode: Linkage
• Transport Package: Carton
• Specification: Diameter 99.7mm/57mm
• Trademark: alarm
• Origin: China
• HS Code: 8531100000
• Production Capacity: 500000/Month

Product Description

TX7100
Intelligent Addressable Optical

Smoke Detector
 

1.Feature and Benefits
EN54-7:2000 +A1:2002 +A2:2006 Compliance
LPCB Approved
Using microprocessor technology with memory capacity up to 10 events
Analogue sending and digital addressing Provide real time algorithm to the control panel Smart linear drift compensation
Onsite adjustable parameter 360-degree visual indicator
Removable chamber against dust and small insect Ancillary remote indicator output
Aesthetically pleasing design
 

2. Technical Specification

Listed LPCB / CE-CPR
Compliance EN54-7:2000 +A1:2002 +A2:2006

Power Rating

Input Voltage 24VDC [16V to 28V]
Current Consumption Standby 0.6mA, Alarm: 4mA

Detector

Protocol/Addressing T&A, Value range from 1 to 254
Sensitivity As per stipulated standard
Indicator Single LED / 360-degree Visual
Material / Colour ABS / White Glossy finishing
Dimension / Height Diameter 99.7 mm / 57 mm
Weight 145g (with Base), 90g (without Base)
Operating Temperature -10°C to +50°C
Humidity 0 to 95% Relative Humidity, Non condensing
 

3. Overview
The TX7100 Intelligent Addressable Optical Smoke Detector is the ideal device for most applications, due to its spiffing linear response to a wide variety of different types of smoke patterns. The unit manufactured the sensitivity requirement of EN 54 part 7, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs. The unit incorporates an intelligent processor that provides Algorithm map, inbuilt A/D converter, Drift compensation, and Self-Diagnosis and History log.
Secure and speedy communication through the on-board processor enables the detector to make its own decision, resulting in greater automation. In the event of fire, the integral microprocessor analyses the signal according to factors such as signal strength and rate of increase, then confirms these patterns with the pre- programmed fire scenarios and smoke patterns, for a faster and safer response. Once it is confirmed, the LED indicates the sensor status and parallel sending communication signal to the control panel. The TX7100 detector is compatible to the TX7004 Analogue Intelligent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid addressable communication compatibility problem.