6 inch Conventional Fire Alarm Bell
| Voltage Range: |
16-28v |
| Humidity Range: |
10%-93% |
| Temperatures: |
-10°C to50°C |
| Material of cover: |
Aluminum |
| Dimension: |
150mm×50mm(D*H) |
| Sound level: |
80dB(A)@1M (minimum) |
| Number of standard: |
EN54-3 |
| Weight: |
380g |
General Description
The bell remains the most commonly used alarm for fire evacuation system, for wall applications, indoors.
They are designed to be used in 24 volt DC systems.
Before Installing
NOTICE: This manual should be left with the owner/user
of this equipment.
Specifications
Voltage ranges: 20vdc to 28vdc (Nonpolarity)
Power and current consumption: 1W, 38ma@24vdc(maximum)
Number of standard: EN54-3
Sound level:80dB(A)@1M (minimum)
Service Use: Fire alarm, general signaling, burglar alarm
Environment type: Type A (indoor)
Input terminal Wire Gauge: 0.28 mm2 to 1.5 mm2
Operating Temp.: -10ºC to +55ºC
Operating Humidity Range: 10% to 93% Relative Humidity ( Non-condensing)
Material of cover: Aluminum
Dimension: 150mm×50mm(D*H) (Without bracket)
BEFORE INSTALLING
NOTICE: This manual should be left with the owner/user of this equipment.
GENERAL DESCRIPTION
The JL188 Electric bell of notification appliances offers a wide range of Sound, for wall and ceiling applications, indoors and outdoors. They are designed to be used in 24 volt DC systems.
Loop Design and Wiring
The system designer must make sure that the total current drawn by the devices on the loop does not exceed the current capability of the panel supply, and that the last device on the circuit is operated within its rated voltage. When calculating the voltage available to the last device, it is necessary to consider the voltage drop due to the resistance of the wire. The thicker the wire, the smaller the voltage drops. Wire resistance tables can be obtained from electrical handbooks.
INSTALLATION
NOTE: All wiring must conform to applicable local codes, ordinances, and regulations. Mounting Indoor Wall or Ceiling Products 1. Attach mounting plate to junction box. 2. Connect field wiring to terminals 3. To attach product to mounting plate. 4. Secure product by tightening the two mounting screws in the front of the product housing.
){kind=link}